Aller au contenu principal

Ausus\Application & Ausus\ApplicationConfig

The two classes a v0.1.x consumer touches every time: Application composes the compiler, the SQLite driver and the runtime; ApplicationConfig is the typed, immutable builder you usually hand to Application::create().

Both ship in the ausus/standard-stack package.

Lifecycle at a glance​

use Ausus\{Application, ApplicationConfig};

$app = Application::create(
        ApplicationConfig::make()
            ->tenant('acme')
            ->roles(['issue.author', 'issue.maintainer'])
            ->sqlite(__DIR__ . '/app.sqlite')
    )
    ->register(new HelloInvoiceDsl())
    ->boot();

$result  = $app->run('billing.invoice.create', null, [...]);   // typed
$view    = $app->render('billing.invoice.summary');             // ViewSchema array
$response = $app->http($psrRequest);                            // PSR-7 → PSR-7

The four-call shape create → register → boot → invoke is the recommended consumer surface. Every other method (the accessors, run(), http(), router(), …) is additive sugar.

Application::create(ApplicationConfig|array): self​

Builds an unbooted Application from a config.

The argument may be either:

  • an ApplicationConfig (recommended — typed, IDE-discoverable, fluent), or
  • a plain array<string,mixed> with the keys catalogued in Configuration reference.

Both forms are bit-for-bit equivalent — an ApplicationConfig is converted to its array form internally before the resolution path runs.

Throws InvalidArgumentException on:

  • an unknown array key (the message lists every recognised key);
  • a config value with the wrong type ('driver' must implement Ausus\PersistenceDriver, 'database' must be a PDO or a string path, 'apiPrefix' must start with /, …).

register(Plugin ...$plugins): self​

Appends one or more plugins. Throws RuntimeException if called after boot(). Idempotent across registrations of distinct plugins.

$app->register(new BillingPlugin(), new ShippingPlugin());

boot(): self​

Compiles every registered plugin into a single MetadataGraph, wires the SQLite driver and the default runtime, and applies the derived schema (CREATE TABLE IF NOT EXISTS per entity + the kernel_audit_log table).

Idempotent: calling boot() twice is a no-op. Throws RuntimeException if no plugin has been registered. Lazy — calling any accessor or invoke() / run() / http() on an unbooted Application boots it first.

Action invocation​

invoke(string $fqn, ?Reference $subject = null, array $inputs = []): array<string,mixed>​

Runs the full Invoker chain — preflight → policy → workflow guard → effect → audit — inside one database transaction. Returns the raw effect outputs as an associative array.

$outputs = $app->invoke('billing.invoice.create', null, [
    'number' => 'INV-001', 'customer_name' => 'ACME', 'amount' => ['amount' => '10', 'currency' => 'USD'],
]);

run(string $fqn, ?Reference $subject = null, array $inputs = []): InvocationResult​

Same chain as invoke(), with a typed return:

final readonly class InvocationResult {
    public string     $actionFqn;
    public ?Reference $subject;        // post-action subject — new ref for create, input subject for transition/update
    public array      $outputs;
    public function id(): ?string;
    public function output(string $key): mixed;
}

Use run() when you want IDE discoverability on the result, or when you need the post-action Reference (e.g. to chain the next invocation in a CLI script).

render(string $projectionFqn, ?Reference $subject = null): array<string,mixed>​

Renders a projection to a ViewSchema array. With a subject → detail shape (data.item); without → list shape (data.items).

$viewSchema = $app->render('billing.invoice.summary');
$detail     = $app->render('billing.invoice.detail', $invoiceRef);

http(ServerRequestInterface $request): ResponseInterface​

One-call HTTP entry point. Internally builds a Router once (lazy, cached) and dispatches every request through it.

use Ausus\Api\Http\Emitter;
use Nyholm\Psr7\Factory\Psr17Factory;
use Nyholm\Psr7Server\ServerRequestCreator;

$factory = new Psr17Factory();
$creator = new ServerRequestCreator($factory, $factory, $factory, $factory);
Emitter::emit($app->http($creator->fromGlobals()));

PSR-17 factory resolution, in order:

  1. ApplicationConfig::responseFactory() / streamFactory() / psr17(...) if configured;
  2. Nyholm\Psr7\Factory\Psr17Factory autodetected when on the autoloader (the path every documented example takes);
  3. otherwise an InvalidArgumentException with a fix-it message.

The mount prefix comes from ApplicationConfig::apiPrefix('/api') (default /api).

router(ResponseFactoryInterface, StreamFactoryInterface, string $prefix = '/api'): Router​

Lower-level factory that builds a fresh Router against the booted graph/driver/audit-sink. Useful when you want to manipulate the Router directly (custom middleware, multiple mount points). Each call returns a new instance; the Router used by http() is cached separately and not affected.

Accessors​

MethodReturnsNotes
graph()MetadataGraphThe compiled graph. Reads boot-cached value.
invoker()Ausus\Runtime\InvokerDrop down to the low-level Invoker.
driver()Ausus\PersistenceDriverThe persistence driver — SqlitePersistenceDriver unless ApplicationConfig::driver() overrode it.
renderer()Ausus\Runtime\ProjectionRendererThe projection renderer used by render().
auditSink()Ausus\AuditSinkThe audit sink the runtime writes through.
pdo()?\PDOThe underlying PDO connection when the built-in SQLite path is used (null only if you supplied a fully-custom driver + auditSink).
tenant()Ausus\TenantAvailable before boot.
actor()Ausus\ActorAvailable before boot.
isBooted()boolWhether boot() has run.
reference(string $entityFqn, string $id): ReferenceReferenceBuilds a Reference scoped to this Application's tenant — convenience for chaining.

Every accessor that returns a runtime service boots the Application lazily on first call.

Errors​

Application::create() throws only InvalidArgumentException. Runtime errors during invoke() / run() / http() are the kernel taxonomy described in Error Reference: PolicyDenied, WorkflowStateMismatch, ConcurrencyConflict, NotFound, UnknownAction, TenantBoundaryViolation, etc. http() maps each to the documented HTTP status via ErrorMapper.

Scope notes​

  • One tenant + one actor per Application. Multi-tenant request handling means one Application per tenant. http() also respects the per-request X-Tenant-ID / X-Actor-* headers that the Router reads; the Application's tenant/actor are used by invoke() / run() (process-level).
  • Not a DI container. Application does not register your services or resolve them; it composes the framework's own services only.

Ausus\ApplicationConfig​

A fluent, immutable typed builder. Every setter returns a new instance with the value applied; the receiver is never mutated. Pass the result of any chain into Application::create(...).

use Ausus\ApplicationConfig;

$config = ApplicationConfig::make()
    ->tenant('acme')
    ->actor('user42')
    ->roles(['invoice.creator', 'invoice.issuer'])
    ->sqlite(__DIR__ . '/app.sqlite')
    ->apiPrefix('/api');

make() is the only entry point — the constructor is private.

Setters​

MethodArgumentDefaultNotes
tenant(string|Tenant)non-empty id, or a Tenant'default'Empty string is rejected.
actor(string|Actor)string → actor id; Actor → full actor (overrides actorId/roles/permissions)—Overloaded for convenience.
actorId(string)non-empty id'app'Explicit alias of actor(string).
roles(string[])list of role names[]Replaces; non-string / empty-string entries throw InvalidArgumentException.
permissions(string[])list[]Same validation as roles().
sqlite(string)non-empty path; ':memory:' valid—Mutually exclusive with pdo() — the second call throws.
pdo(\PDO)live connection—Mutually exclusive with sqlite().
migrate(bool = true)toggletrueWhether boot() runs SchemaDeriver against the chosen database.
driver(PersistenceDriver)advanced—Replace the SQLite driver entirely.
auditSink(AuditSink)advanced—Replace the database audit sink.
kernelVersion(string)non-empty'1.0.0'Recorded in the graph; used only by hash determinism.
apiPrefix(string)non-empty, starts with /, no trailing /uses Router default (/api)URL prefix the Router mounts under.
psr17(object)a factory implementing both ResponseFactoryInterface and StreamFactoryInterface (e.g. nyholm's Psr17Factory)autodetect nyholmConvenience setter — assigns both factory slots at once.
responseFactory(ResponseFactoryInterface)—autodetect nyholmSplit form when your library ships separate factories.
streamFactory(StreamFactoryInterface)—autodetect nyholmSame.

Output​

toArray(): array<string,mixed> returns the canonical array form Application::create() consumes. Only non-default values appear in the output — the result is the minimal representation of the choices the caller made.

$config = ApplicationConfig::make()->tenant('acme');
$config->toArray();
// → ['tenant' => Ausus\Tenant{...}]

Property access​

Every accepted value is exposed as a public readonly property: $config->tenant, $config->actor, $config->actorId, $config->roles, $config->permissions, $config->pdo, $config->sqlitePath, $config->migrate, $config->kernelVersion, $config->driver, $config->auditSink, $config->apiPrefix, $config->responseFactory, $config->streamFactory. Read-only.

Validation timing​

Every setter validates at the call that introduced the value — unknown keys, empty strings, conflicting persistence config, wrongly-typed factories. There is no boot-time validation deferral: a misconfigured chain throws before the chain ends.

// Throws at .sqlite(), before boot, with a clear message:
ApplicationConfig::make()->pdo($pdo)->sqlite('/tmp/x.sqlite');
// InvalidArgumentException: ApplicationConfig::sqlite(): cannot set a sqlite
// path when pdo() has already been set — they are mutually exclusive.